SmartRelayControl – Support

Thank you for using SmartRelayControl, a small utility app that lets you control a compatible Bluetooth relay configured system.

1. Basic Requirements

• iPhone or iPad running a supported version of iOS / iPadOS.
• A compatible Bluetooth relay module installed and powered.
• Relay system wiring done safely by a qualified person.

2. Getting Started

1. Install SmartRelayControl from the App Store.
2. Turn on Bluetooth on your iOS device.
3. Power your relay module and place it within range.
4. Open the app and select the relay from the device list.
5. Use the available buttons to trigger the desired relay functions.

3. Safety Notice

Always make sure the area around the relay controlling system is clear before activating it. You are responsible for complying with local safety rules.

4. Troubleshooting

• The relay is not listed: check power to the relay and make sure Bluetooth is enabled.
• The relay connected system doesn't react: verify wiring, fuses, and that the relay contacts are correctly connected.
• Connection drops: reduce distance, remove obstacles, and make sure only one phone is connected.

5. Contact Support

If you need help or want to report a bug, please contact:

Email: udaybejawada@hotmail.com

When you write, you can optionally include your iOS version, device model, relay model, and a short description of what happened. Please do not send any sensitive personal information.

Privacy information for this app is available in the Privacy Policy and Privacy Choices pages.